Pure Effect Filters – Countertop Filtration System

Description

Pure Effect's water filtration solutions are some of the best on the market. The Ultra-Disinfect Countertop filtration system compliments the whole house filtration system keeping natural minerals intact, addressing fluoride removal, and thoroughly removing a wide range of contaminates including but not limited to:

• Microorganisms:
  • Parasites (Giardia, Cryptosporidum, etc.)
  • Bacteria
  • Viruses
  • Copepods
  • Mold / Algae
• Chemicals:
  • Fluoride / Arsenic / Bromide
  • Chlorine
  • Chloramine
  • Drug Residues
  • Hydrogen Sulfide
  • Herbicides/Pesticides
  • Volatile Organics (VOCs incl. Vinyl Chloride)
  • Synthetic Organics (SOCs)
  • Hormone/Endocrine Disruptors (EDCs)
  • Disinfection Byproducts**: THMs, HAAs, Chloroform & others
  • Perfluorinated Chemicals (PFAS, PFOS, PFOA, PFNA)
  • Advanced Toxins: NDMA (byproduct of Chloramine)
• Radiation:
  • Cesium-137 /134
  • Strontium-90
  • Iodine-131
  • Radium
  • Radon
  • Plutonium
  • Tritium
  • Rubidium-106
  • Cobalt-60
  • Uranium
  • Other Alpha & Beta Emitters
• Particles:
  • Micro and Nano Plastic Fibers
  • Sediment
  • Silica
  • Sand
  • Rust
  • Silt

Filtration Process: 

Phase 1: (Remove Chemicals, Sediment & Cysts) The SuperBlock^TM  uses two different types of Catalytic-Grade Activated Carbon to capture an unparalleled super wide-range of various chemicals, making it up-to 15x more effective than regular activated carbon blocks. It provides removal of microbial cysts and fine sediment about 100x smaller than the width of human hair, and is infused with the natural KDF55 media to discourage bacterial growth and fouling, which often happens with low-end carbon blocks.

Phase 2: (Disinfect Bacteria, Parasites, Molds, Viruses & NDMA) The filtered water passes through a Stainless-Steel Reactor Chamber which houses a High-Potency UV Light in Crystal Quartz Glass. The UV Light is fully sealed inside the chamber and emits a light wavelength of 253nm with a UV intensity dose of approximately 40mJ/cm2 which is the optimal parameters to safely inactivate microorganisms found in water, including bacteria and viruses.

Phase 3: (Secondary Disinfect Bacteria, Parasites, Molds, Viruses) The filtered water enters the absolute 0.05 Micron UltraFiltration Membrane. 0.05 micron is the optimal pore size to capture particles approximately 2x smaller than the smallest 0.1 micron bacteria, parasites, copepods and mold spores, as well as some viruses, while still allowing natural minerals to pass through.

Phase 4: (Fluoride Removal)  The filtered water enters the next chamber where an entire cartridge is dedicated to Fluoride Reduction using the advanced FluorSorb-MAX^TM (alumina-free, all-natural) media. It consists of Activated Carbon Bonded with a unique Calcium Substrate which is capable of effectively absorbing the negatively charged fluoride ions.

Phase 5: (Remove Radiation, Heavy Metals & Revitalization) The AntiRad-Plus^TM cartridge features the Patented KDF55 Media, Activated Zeolite Mineral, Advanced Catalytic Activated Carbon and a Food-Grade Calcium media. This final phase significantly reduces heavy metals, radiation, algae, molds and additional chemicals and completes the filtration process by revitalizing your water.